Medical care robots being made with 3D origami in B.C. lab

The humanoid sensing robot has a 3D printed finger cap that measures oxygen levels. (Dr. Woo Soo Kim)The humanoid sensing robot has a 3D printed finger cap that measures oxygen levels. (Dr. Woo Soo Kim)
This robotic arm, built in SFU’s Surrey campus, can measure heart rate, breathing, temperature and muscle movements. (Dr. Woo Soo Kim)This robotic arm, built in SFU’s Surrey campus, can measure heart rate, breathing, temperature and muscle movements. (Dr. Woo Soo Kim)

A B.C. professor would like to see a robot take your vitals when you visit a doctor in the somewhat near future.

Dr. Woo Soo Kim, associate professor of mechatronic systems engineering at Simon Fraser University, has developed health care robots that can measure heart rate, respiration rate, temperature and oxygen levels. The oxygen level measurement in particular could be used to monitor severe COVID-19 patients.

He hopes the sensor robots can support doctors and nurses, and is currently using two prototypes to collaborate with a team of Vancouver Coastal Health researchers on how a technology like this could be applied in practice.

There’s a lot to be worked out — including how comfortable will patients be receiving care from a robot – but Kim hopes to have sensing robots in health care in five to 10 years. He imagines a full complement of medical care robots, including passive bots that take vitals, companion bots that would hang out with patients to regularly monitor vitals so people don’t need to wear an uncomfortable device, and even receptionist bots.

We might already be warming up to machine-based medical care, as a recent report indicated most British Columbians now prefer virtual meetings with their doctors for routine check ups.

READ MORE: Majority of British Columbians now prefer routine virtual doctor’s visits: study

His lab, Additive Manufacturing in SFU’s Surrey campus, has been working on advanced 3D printing, wearable technology and sensing robots since he arrived in 2010, and narrowed their focus health care uses in 2018. He works with six to seven students and interns.

Now they have two working prototypes to take to doctors and nurses. One is an arm, completely made in the lab with 3D printed origami. The second machine is a shiny, white humanoid that Kim’s lab has added on their own hand with highly specialized electron sensors.

The origami design was chosen not just because it’s cool. His lab has spent years testing various architectural solids with 3D printing, and found that “3D origami structures have naturally less fatigue characteristics with re-configurable structures. So, it’s good if they are used for bending structures such as our fingers,” Kim said.

Funding has been partially provided by the Natural Sciences and Engineering Research Council of Canada, and the lab is applying for more grants to expand development.

The first stage of robotic health care is passive, with the machines gathering information and sharing results with human health care professionals, but Kim envisions future machines that could be more involved.

Do you have something to add to this story or something else we should report on? Email: zoe.ducklow@blackpress.ca


BC HealthScience

Get local stories you won't find anywhere else right to your inbox.
Sign up here

Just Posted

McLeod disappointed with first federal budget in two years

The 2021 Federal Budget released Monday, April 19 is “disappointing and politically… Continue reading

A District of Barriere sign board on Barriere Town Road, just north of the firehall, now provides public information and education from the municipality. (Jill Hayward photo)
Street lighting improvements and signage for Barriere

The District of Barriere advise they will be upgrading or installing new… Continue reading

(Lana Laskovic photo)
Barriere Lions Club raise over $4100 to support local Legion

(L-r) Barriere Legion Branch 242 president Al Fortin is shown accepting a… Continue reading

A woman wears a protective face covering to help prevent the spread of COVID-19 as she walks past the emergency entrance of Vancouver General Hospital in Vancouver, B.C., Friday, April 9, 2021. THE CANADIAN PRESS/Jonathan Hayward
54 more cases of COVID-19 in Interior Health

Thirty-two people in the region are in hospital with the virus, 11 of them in intensive care

B.C. Finance Minister Selina Robinson outlines the province’s three-year budget in Victoria, April 20, 2021. (B.C. government video)
B.C. deficit to grow by $19 billion for COVID-19 recovery spending

Pandemic-year deficit $5 billion lower than forecast

A large crowd protested against COVID-19 measures at Sunset Beach in Vancouver on Tuesday, April 20, 2021. (Snapchat)
VIDEO: Large, police-patrolled crowds gather at Vancouver beach for COVID protests

Vancouver police said they patrolled the area and monitored all gatherings

FILE – The Instagram app is shown on an iPhone in Toronto on Monday, March 19, 2018. THE CANADIAN PRESS/Graeme Roy
Judge acquits B.C. teen boy ‘set up’ on sex assault charge based on Instagram messages

The girl and her friends did not have ‘good intentions’ towards the accused, judge says

Kai Palkeinen recently helped a car stuck on the riverbed near the Big Eddy Bridge. While the car could not be saved, some of the driver’s belongings were. It’s common for vehicles to get stuck in the area due to significantly changing river levels from Revelstoke Dam. (Photo by Kai Palkeinen)
“I just sank a car’: Revelstoke resident tries to save vehicle from the Columbia River

Although it’s not permitted, the riverbed near the city is popular for off roading

Meng Wanzhou, chief financial officer of Huawei, walks down the street with an acquaintance after leaving B.C. Supreme Court during a lunch break at her extradition hearing, in Vancouver, B.C., Thursday, April 1, 2021. A judge is scheduled to release her decision today on a request to delay the final leg of hearings in Meng Wanzhou’s extradition case. THE CANADIAN PRESS/Rich Lam
B.C. judge grants Meng Wanzhou’s request to delay extradition hearings

Lawyers for Canada’s attorney general had argued there is no justification to delay proceedings in the case

B.C. Premier John Horgan announces travel restrictions between the province’s regional health authorities at the legislature, April 19, 2021. (B.C. government photo)
B.C. sees 862 more COVID-19 cases Wednesday, seven deaths

Recreational travel restrictions set to begin Friday

B.C. Finance Minister Selina Robinson is photographed following her budget speech in the legislative assembly at the provincial legislature in Victoria, Tuesday, April 20, 2021. THE CANADIAN PRESS/Chad Hipolito
B.C. budget lacks innovative drive, vision during uncertain times, say experts

Finance Minister Selina Robinson’s budget sets out to spend $8.7 billion over three years on infrastructure

Using panels kept cold by water circulating within them, B.C. researchers compared thermal comfort in 60 of the world’s most populous cities, including Toronto. (Lea Ruefenacht)
B.C. researchers use air conditioning to combat spread of COVID particles

Dr. Adam Rysanek and his team have proven a new worthwhile system – a mixture of cooling panels and natural ventilation

Police road checks are coming for people travelling between regions while COVID-19 travel restrictions are in place. (Black Press file photo)
B.C. clarifies COVID-19 travel restrictions, Lower Mainland a single zone

Vehicle checks on highways, at ferry terminals to start Friday

Most Read